TRACKER "Classic Ex-Track" Skateboard Trucks 8" Old Skool 1970s 1980s ExTrack PAIR Silver
-19431-p.jpg?v=1aae821f-7c4c-46f2-8641-33d8d5424626){kind=tracking}
description - Customer Reviews
Tracker
"Classic - ExTracks"
130mm hanger
8" inch Wide axle (approx.)
Polished Silver Finish
Re-Issues
Pair of trucks
Pair of new re-issued Tracker Ex-Track trucks.
These are almost exactly the same as the Trackers you all rode back in the very late 70s and through the 1980s.
The hangers and bases are identicle being cast from the original molds. Check out the underside of the baseplate with the "Guaranteed Made in the USA" cast onto it- iconic.
These are almost exactly the same as the Trackers you all rode back in the very late 70s and through the 1980s.
The hangers and bases are identicle being cast from the original molds. Check out the underside of the baseplate with the "Guaranteed Made in the USA" cast onto it- iconic.
NOTE : SORRY. NOT ANY MORE THEY DON'T!
The old molds are wearing out so all of the new stock now just have a ground flat base on the baseplates. ;-( The lettering isn't as crisp as it use to be either but at least they are available for now - when the molds finally go that will be it forever!
Original Tracker "Ex/Sx" copers will fit on these hangers perfectly.
The baseplates come with just the "old holes" so they'll fit original 70s boards & some re-issues if they have the old hole drillings.
If you need the authentic look for on original or re-issued deck then you won't find anything better than the Tracker "Classic" re-issues.
They'll look perfect on the re-issued G&S boards (Warptail, Bowlrider, Teamrider, Proline, Side Cut, etc) and re-issued Bones Brigade (powell) boards plus those decks won't require any drilling as they are also old hole drilled. To fit them on Alva, Vision, Powell re-issues you'll have to drill the decks though. This is not a problem as the couple of extra holes would be hidden under the baseplates and griptape -until you took your board apart no one would ever know. ;-)
They are considerably more expensive than the Tracker "Dart" trucks so check those out if you are not so worried about having such an exact genuine look to your set-up.
Brilliant, classic trucks -Trackers were fore fathers of all modern trucks.
Original Tracker "Ex/Sx" copers will fit on these hangers perfectly.
The baseplates come with just the "old holes" so they'll fit original 70s boards & some re-issues if they have the old hole drillings.
If you need the authentic look for on original or re-issued deck then you won't find anything better than the Tracker "Classic" re-issues.
They'll look perfect on the re-issued G&S boards (Warptail, Bowlrider, Teamrider, Proline, Side Cut, etc) and re-issued Bones Brigade (powell) boards plus those decks won't require any drilling as they are also old hole drilled. To fit them on Alva, Vision, Powell re-issues you'll have to drill the decks though. This is not a problem as the couple of extra holes would be hidden under the baseplates and griptape -until you took your board apart no one would ever know. ;-)
They are considerably more expensive than the Tracker "Dart" trucks so check those out if you are not so worried about having such an exact genuine look to your set-up.
Brilliant, classic trucks -Trackers were fore fathers of all modern trucks.
Tracker on their "Classics":
ExTrack hangers and baseplates are cast from the original molds and feature black 88a upper and lower bushings for better authenticity. Exltrack bases are drilled with the old school, 4-hole pattern. If your trying to re create a board from your past or set up something you know will last, these are a necessity.
Tracker uses 356 T6 aircraft grade aluminium, 4140 Chromoly steel axles and grade 8 kingpins in all of our trucks. Every part of this truck was proudly hand built / inspected in the U.S.A and comes with a lifetime guarantee.
Price is for a PAIR of trucks.
NOTE : These new ones now no longer have the "made in USA" on the bottom of the baseplates. ;-(
The original Tracker moulds are wearing out so we may not be able to get any soon! ;-(
Note : Tracker describe these as 8 inch but they are actually closer to 7.75" wide.
130mm hanger width (approx 5.0")
196mm axle (approx. 7.75")
356 T6 Aircraft grade Aluminium
4140 Chromoly steel axles
cast from the original molds
Black 88a quality urethane bushings
Old hole baseplate pattern
Made in USA
Write an online review and share your thoughts with other shoppers!
Be the first to review this product
