D-STREET Skateboard Angled Riser Pads Longboard BLACK PAIR Old Skool Risers

D-Street

Riser Pads

Angled/Wedged

Pair

New & Old Truck Hole Pattern

BLACK

Slalom/Old Skool/Longboard/Cruiser

 

New pair of angled riser pads for extra wheel clearance & increased turning in a semi-soft compound (pretty firm actually) to help absorb shock and vibrations.

The are wedged from approx. 13mm down to 8mm.

Angled risers increase your trucks turning ability.

If you want reduced turning then mount the riser(s) the "wrong" way around.  You'll have to drill a couple of extra holes to fit them this way though (shouldn't be a problem for all but the most incompetent at basic DIY)

For all 70s, 80s and 90s original/retro boards, slalom, downhill, longboards, cruiser boards and pool boards and even some mountain boards.
I actually use these on a Black Label pool board with Krux 8.5" trucks - gives wheel clearance for 60mm wheels but more importantly they enable my trucks to turn sharper so I can carve easier in bowls.

If you're running bigger wheels then you probably need some extra wheel clearance...these are the cure for your wheelbite worries.

They will fit all old hole and new hole pattern trucks.

Price is for one pair (two risers)

Note: 1.5" long bolts will be needed to mount these (for a regular thickness deck and truck baseplate)